!mRBaTsroMBGoTAotmY:matrix.org

Current Projects - Medway Makers

17 Members
www.medwaymakers.com - Discussion about ongoing projects or ideas for new ones2 Servers

Load older messages


SenderMessageTime
11 May 2021
@TheArduinoGuy:matrix.orgTheArduinoGuySo on the bottom there you have the positive wire with a 68K resistor in series and the negative wire with a 150K resistor. There appears to be a trace joing the tops of both of those resistors. I need to check that tonight with my continuity probe.08:55:58
@TheArduinoGuy:matrix.orgTheArduinoGuySo I am wondering if this is why my new pad is not working correctly or if it is a mechanical issue08:56:22
@TheArduinoGuy:matrix.orgTheArduinoGuy invited @chupi:matrix.orgchupi.11:11:08
@TheArduinoGuy:matrix.orgTheArduinoGuy invited @rooty:sim.fab-l3.orgrooty.11:11:39
@chupi:matrix.orgchupi joined the room.12:28:12
@TheArduinoGuy:matrix.orgTheArduinoGuySo after doing a bit of research it looks like those resistors are essential so i'll solder some on tonight and see if it improves things13:10:07
@TheArduinoGuy:matrix.orgTheArduinoGuy I am sure ionised would know what they are for 13:25:37
@sones:matrix.orgTom Sparrow Drum looks close to finishing TheArduinoGuy 16:46:35
@ionised:matrix.orgionised
In reply to @TheArduinoGuy:matrix.org
I am sure ionised would know what they are for
Only thing I can think is to balance the levels of the piezos. Often an amplifiers input will be impedance matched to the signal source so it might be optimised for a different amplifier input of your original system. Resistors across the piezo are most likely to dampen or dissipate the ringing you'll get from a piezo.
16:51:30
@chupi:matrix.orgchupithanks for the invitation :-)17:27:38
@pangalactic:matrix.orgPanGalactichttps://youtu.be/EdjtfmShCwg The filter I was working on at the weekend. I love the amount of resonance this circuit adds! The filter cutoff is voltage controlled, so I can replace the pot with a microcontroller & step sequencer.22:52:12
12 May 2021
@TheArduinoGuy:matrix.orgTheArduinoGuyNice05:09:30
@mattbhome3:matrix.orgmattbhome3 PanGalactic: Really cool! Sounds like a fast dripping tap in some places. 07:53:52
@rooty:sim.fab-l3.orgrooty joined the room.08:19:06
13 May 2021
@adhdhobbyist:matrix.orgmethod2madnessIMG_20210512_202631_547.jpg
Download IMG_20210512_202631_547.jpg
12:07:37
@adhdhobbyist:matrix.orgmethod2madnessMy new logo guys12:07:48
@adhdhobbyist:matrix.orgmethod2madnessWhat you think? 12:08:00
@adhdhobbyist:matrix.orgmethod2madnessMade it myself12:08:18
@TheArduinoGuy:matrix.orgTheArduinoGuyLooks great!12:20:25
@mattbhome3:matrix.orgmattbhome3image.png
Download image.png
12:28:40
@mattbhome3:matrix.orgmattbhome3 Hi method2madness. Nice logo. I did a Inkscape guide for a stack of coins and made them into cogs. 12:30:09
@adhdhobbyist:matrix.orgmethod2madness
In reply to @TheArduinoGuy:matrix.org
Looks great!
Thanks!
14:36:22
@adhdhobbyist:matrix.orgmethod2madness
In reply to @mattbhome3:matrix.org
Hi method2madness. Nice logo. I did a Inkscape guide for a stack of coins and made them into cogs.
Thanks, yeah the maker cog coins look great
14:37:04
14 May 2021
@mattbhome3:matrix.orgmattbhome3
In reply to @adhdhobbyist:matrix.org
sent an image.
method2madness: I like the cog idea here. Do you mind if I play about with logo ideas as they come to me? I'm thinking the logo look like it could be made.
10:09:47
@mattbhome3:matrix.orgmattbhome3121E.png
Download 121E.png
10:10:10
@TheArduinoGuy:matrix.orgTheArduinoGuyLooks like some kind of witchcraft symbol10:24:02
@TheArduinoGuy:matrix.orgTheArduinoGuyNeeds to be red with blood dripping from it10:24:16
@mattbhome3:matrix.orgmattbhome3I liked how reversing the 2 made something that looked liked a girl crossing their arms.10:49:55
@mattbhome3:matrix.orgmattbhome3121E_2.png
Download 121E_2.png
10:50:27
@TheArduinoGuy:matrix.orgTheArduinoGuy The 1 on the right seems to be closer to the top of the cube than the one on the left mattbhome3 11:19:35

There are no newer messages yet.


Back to Room List