| 2 Aug 2022 |
 hobbitus | Yes I did use the same image, I'm trying to get the same OS - Manjaro to work 😉 | 21:03:18 |
| hobbitus | yes, at first I didn't realised, but it make sense | 21:03:44 |
 @strit:matrix.org | Switch in extlinux.conf to use root=/dev/<device> instead of root=PARTUUID=<PARTUUID>. | 21:04:32 |
| @strit:matrix.org | * Switch in extlinux.conf to use root=/dev/<device/partition> instead of root=PARTUUID=<PARTUUID>. | 21:04:51 |
| hobbitus | I already changed all UUID as well as PARTUUID, not just I didn't consider to use root=/dev/<device/partition>but it helps with mount as well | 21:07:38 |
| @strit:matrix.org | yes. | 21:09:42 |
| 4 Aug 2022 |
 T. H. Wright | While trying to charge my OG PP that appeared to have a drained battery, I've noticed that it does not appear to be charging at all. Instead the LED is flashing yellow. Does this have a meaning in Manjaro's use of the LED or is it the phone receiving just enough power and losing it again, perhaps like the earlier boot issue the OG PP had due to a completely drained battery? | 02:26:48 |
 @skquinn:matrix.org | could be, do these things have removable batteries? | 02:43:06 |
| @skquinn:matrix.org | you could try charging it externally just to be sure | 02:43:14 |
| T. H. Wright | That thought occurred to me, too. It fails to boot; I'm guessing something happened to my install or corrupted it; not sure. I'll probably try flashing a new install soon. | 03:11:04 |
|  @vencd:matrix.org left the room. | 03:19:23 |
|  Martin joined the room. | 07:00:34 |
 @pak0st:matrix.org | when in doubt - uart 😆 | 10:48:32 |
| @strit:matrix.org | In reply to @thwright:matrix.org
While trying to charge my OG PP that appeared to have a drained battery, I've noticed that it does not appear to be charging at all. Instead the LED is flashing yellow. Does this have a meaning in Manjaro's use of the LED or is it the phone receiving just enough power and losing it again, perhaps like the earlier boot issue the OG PP had due to a completely drained battery? I have experienced previously that if the battery is completely drained, that it can take 10+ hours of charging until it gets to a bootable state again. | 11:20:49 |
| T. H. Wright | In reply to @strit:matrix.org
I have experienced previously that if the battery is completely drained, that it can take 10+ hours of charging until it gets to a bootable state again. yikes! I suppose I can always try for longer! | 11:38:02 |
| T. H. Wright | Flashed a new SD card, still not booting, battery or not. 😬 | 13:23:14 |
| @strit:matrix.org | It needs a battery to function, I believe. | 13:24:18 |
| @pak0st:matrix.org | depends on what's used to provide power without a battery - my PP boots fine when using usb3 from pc but goes bootlooping when operating just from my Steam Deck power supply | 13:29:09 |
| T. H. Wright | In reply to @strit:matrix.org
It needs a battery to function, I believe. Should just be the modem to power on; it can power on without it but it won't have wwan access | 13:36:58 |
| T. H. Wright | Grr… I'm in the middle of a move and can't find my uart | 13:37:22 |
| T. H. Wright | In reply to @strit:matrix.org
It needs a battery to function, I believe. * Should just be the modem that can't power on; it can power on without it but it won't have wwan access | 13:39:43 |
| T. H. Wright | Got it:
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
| 14:28:17 |
| @skquinn:matrix.org | Oy. that doesn't look good | 17:59:01 |
| T. H. Wright | Any suggestions for further troubleshooting this one on my OG PP? https://forum.manjaro.org/t/og-pinephone-wont-boot/118412
It appears to boot loop here:
Found U-Boot script /boot.scr
…
Moving Image from 0x40080000 to 0x40200000, end=415b0000
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Ramdisk to 498de000, end 49fffb20 ... OK
Loading Device Tree to 00000000498cd000, end 00000000498dd1d5 ... OK
Starting kernel ...
[ 0.570809] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
U-Boot SPL 2022.04-1 (Apr 06 2022 - 03:51:54 +0000)
DRAM: 3072 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.6(release):
NOTICE: BL31: Built : 03:51:54, Apr 6 2022
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x20884d8, model: Pine64 PinePhone (1.2)
U-Boot 2022.04-1 (Apr 06 2022 - 03:51:54 +0000) Manjaro Linux ARM
…
Found U-Boot script /boot.scr
…
Moving Image from 0x40080000 to 0x40200000, end=415b0000
## Flattened Device Tree blob at 4fa00000
Starting kernel ...
[ 0.570809] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
| 20:46:38 |
| 5 Aug 2022 |
|  @gowpjmu93:matrix.org left the room. | 13:19:35 |
|  @contact:ischa.dev joined the room. | 15:53:47 |
| 6 Aug 2022 |
|  steevdave joined the room. | 05:24:25 |
|  @alaraajavamma:urheiluaki.fi joined the room. | 18:49:47 |
| 7 Aug 2022 |
| @alaraajavamma:urheiluaki.fi | Hi! I am testing phosh-next from community repo and have to say wow, this feels superb. I know that this is alpha/not-ready/testing release but I think it actually works better than current betas 😁. | 10:48:14 |
| @alaraajavamma:urheiluaki.fi | There are some minor issues but my question is that is phosh-next there just for fun or is it the direction where Phosh is going? Just thinking that is it worth to debug those issues | 10:50:21 |
