| 14 Jun 2024 |
 Artur Scholz | 
Download Screenshot_2024-06-14_17-54-56.png | 16:00:27 |
| Artur Scholz | cajt: Thanks for you suggestions on Raspi proto board. I implemented most of them. | 16:01:05 |
| Artur Scholz | * cajt: Thanks for you suggestions on Raspi proto board. I implemented most of them. Will send for production now. | 16:01:17 |
| Artur Scholz | If someone is inclined to work on test cases for spacecan that would be great. The problem is that one needs to bring up a virtual CAN network for the tests. That can be done locally, but I do not know how to do it for the gitlab pipelines. You can see my attempts in the test branch... https://gitlab.com/librecube/lib/python-spacecan/-/network/tests?ref_type=heads | 17:59:03 |
| 15 Jun 2024 |
 cajt | creating, modifying and deleting network interfaces might be limited for a good reasons. I would also assume that HiL Testing is the prefered approach in the long run, so why not skip it. Maybe add a commit hook to remind the commiter to have passing tests for the has being commited, to have some process in place. Otherwise one might have to setup a self-hosted runner, and set it up accordingly (would be similar for a HiL too). | 07:12:53 |
| 16 Jun 2024 |
|  Rajkumar set a profile picture. | 12:38:21 |
| 17 Jun 2024 |
|  rehan_chalana joined the room. | 09:18:55 |
 Jan-Peter | 
Download image.png | 18:39:10 |
| Jan-Peter | So I am working on building the 3U FrameA - inspired by the 2U Frame | 18:39:38 |
| Jan-Peter | And I am stuck on the very last step | 18:39:48 |
| Jan-Peter | How to sink in the out most screws? | 18:40:21 |
| Jan-Peter | Also, its my first time using freecad.
very addictive. But you need some time to get used to it. | 18:40:57 |
| Jan-Peter | Download 3U_FrameA.FCStd | 18:43:10 |
| Artur Scholz | Use hole with iso metric threaded profile | 19:47:40 |
| Jan-Peter | i did | 19:53:29 |
| 18 Jun 2024 |
|  Rajath-Pai changed their display name from phantom-observer to Rajath-Pai. | 06:08:44 |
| Rajath-Pai set a profile picture. | 06:09:09 |
| Jan-Peter | 
Download image.png | 06:27:47 |
| Jan-Peter | Ok
I got it.
I was on the wrong plane | 06:27:54 |
| Jan-Peter | But something is wrong with my measurements ...
The top whole at the bottom unit and the bottom whole at the next unit are 28mm apart, as in the 2U example, but within their units, their still not correct .. | 06:29:55 |
| Artur Scholz | Compare the 1u with 2u. I remember there was same issue. | 06:40:27 |
| Artur Scholz | Jan-Peter: Problem solved? Maybe Babalola Emmanuel can give support? | 20:10:09 |
| Artur Scholz | And do you have a 3D printer large enough to print it? | 20:10:28 |
 Babalola Emmanuel | In reply to @jan-peter:matrix.org
Ok
I got it.
I was on the wrong plane I hope you've been able to find solution to that? | 20:27:02 |
| 19 Jun 2024 |
| Jan-Peter | In reply to @artur.librecube:matrix.org
And do you have a 3D printer large enough to print it? I have a meeting with the right institute later (regarding something else) - I will ask them. | 06:33:22 |
| Jan-Peter | Otherwise I will have to print it in copper 🤪 | 06:33:49 |
| Jan-Peter | In reply to @babalola_emmanuel:matrix.org
I hope you've been able to find solution to that? the plane yes.
The postioning, not yet | 06:34:16 |
| 20 Jun 2024 |
| Jan-Peter | 
Download image.png | 06:23:49 |
| Jan-Peter | 3U CubeSat FrameB is done 🥳 | 06:24:05 |
| Jan-Peter | Although I i have small issue with one of the holes.
Maybe you can spot it here 😄 | 06:24:35 |
