| 15 May 2024 |
 Husseinat Etti-Balogun | In reply to @artur.librecube:matrix.org
@room Anyone interested in getting hands dirty with PCB design (using KiCAD)? Here is the task: Add support for dual CAN bus to the raspi proto board. Find more details here: https://66222-44717.pph-server.de/projects/developments/work_packages/103/activity bingnan this looks up your alley | 23:32:00 |
| 16 May 2024 |
 Hasan | 
Download image.png | 04:39:33 |
| Hasan | Most bugs have been fixed, code has been tested, I have added patches from my version of the code | 04:40:21 |
| Hasan | 
Download image.png | 05:05:50 |
| Hasan | fixed file path bug, now it uses current working directory, looks for the pluto file in current working directory and generates pdf based on that. Fixed and tested Artur Scholz | 05:07:48 |
| Hasan | * fixed file path bug, now it uses current working directory, looks for the pluto file in current working directory and generates pdf based on that (As mentioned in readme). Fixed and tested Artur Scholz | 05:08:26 |
| 17 May 2024 |
 Artur Scholz | Some updates on development guidelines: https://librecube.gitlab.io/development/overview/ | 12:06:11 |
| Artur Scholz | Babalola Emmanuel: Finally I was able to open your battery board expansion (https://gitlab.com/librecube/prototypes/platform-battery-expansion-board) with the latest KiCAD version. Good job - board will be produced in the next days. | 15:00:54 |
| Artur Scholz | cajt: Will you share your raspi design? | 15:14:26 |
| Artur Scholz | Turns out the Raspi 5 has 4 UARTS available at GPIO, so it can be routed directly to CubeSat connector. | 15:14:56 |
| Artur Scholz | bingnan: Babalola Emmanuel , and anyone else interested in KiCAD: I added the second CAN controller in the raspi-proto board schematic. What's left to do is the parts placement and routing: https://gitlab.com/librecube/templates_and_tools/prototype-boards/-/tree/main/src/electrical/prototype-board-raspi?ref_type=heads | 16:57:42 |
 cajt | In reply to @artur.librecube:matrix.org
cajt: Will you share your raspi design? But its 4-layer and still misses some minor stuff, like interrupts lines and the second-chip select. Also some symbols and footprints might need some attention. Like the HC-49 crystal can ist probably too long. Didn't touch any of that due to the 4-slayer thing. | 19:19:47 |
| Artur Scholz | In reply to @cajt:matrix.org
But its 4-layer and still misses some minor stuff, like interrupts lines and the second-chip select. Also some symbols and footprints might need some attention. Like the HC-49 crystal can ist probably too long. Didn't touch any of that due to the 4-slayer thing. you're welcome to review todays update then (and do the routing 🤑) | 20:09:07 |
| 21 May 2024 |
| cajt | There is an Issue with collected RIDs.
Some major aspects of the design are left unchecked.
Also is there a refence Implementation for this, or is everything new? Especially the interfacing chain from mcp2518 upto the linux driver should be verified before commiting to board design and manufacturing. | 06:35:52 |
| 23 May 2024 |
| cajt | 
Download 20240523_145436_7825663874880095368.jpg | 12:55:30 |
| cajt | ... that RISC-V FPGA thingy | 12:56:27 |
| cajt | btw, there is also seL4, RTEMS and Linux support for that thingy (at least the polarfire soc) | 14:59:41 |
| cajt | there is acutally a radiation hard version, different size fabric, but they don't give SEE test data without an NDA, but claim to reach at least 100kRad. But I have no use for that anyways. | 15:08:47 |
 Red | I just saw a server from the Open Compute project., with FPGAAAAA | 15:11:29 |
| cajt | Yeah, data processing and networking is a good fit for FPGAs | 16:08:51 |
| cajt | But IOs and timing critical stuff fits well | 16:10:34 |
| cajt | * But IOs and timing critical stuff fits well too | 16:12:06 |
|  fredy invited  azisi. | 16:34:05 |
| azisi joined the room. | 16:34:15 |
| 29 May 2024 |
|  dpmj joined the room. | 17:39:13 |
| dpmj | hi everyone 🤠 | 17:39:55 |
 Babalola Emmanuel | In reply to @dpmj:matrix.org
hi everyone 🤠 Hello | 17:40:58 |
| Hasan | In reply to @dpmj:matrix.org
hi everyone 🤠 Hi 👋 | 17:55:42 |
| dpmj | I'm Juan, a telecom engineer from Spain. I'm developing a CubeSat board and came across librecube. Your work is really impressive, thanks a bunch. | 17:57:15 |
| dpmj | I have a technical question tho | 17:58:05 |
