!gwVkCNuyEZrsmYmuvi:matrix.org

Electronics For All (EFA)

328 Members
About EFA Community: For People around the world, who are interested in Embedded SW/HW, Electronics, Industrial Automation, Robotics, OSH, OSS, Beacons, 3D Fab,Professional N/W'ing, knowledge sharing & discussions on these technologies & engineering.36 Servers

Load older messages


SenderMessageTime
6 Nov 2023
@purplelady:matrix.orgPurpleLady * Of course, instead of an LFSR, one could use a ROM and a counter. Put an even, scrambled table in the ROM with balanced periods. That would not be truly random, but it would be no worse than LFSR. That's just combinational logic generating the same table each time. So the counter chips drive the address lines and point to a different "random" number. Now, what if you want to use a seed? Just add a number to it for the entire period. thus the spacings are the same, but using different numbers. To make that seem more random, have a way to back up the state of your counters between powerings. So if you use NVRAM, the last address counter value and the addition offset can be backed up and restored for the next boot. So the user's behavior can add to the randomness.22:16:03
10 Nov 2023
@purplelady:matrix.orgPurpleLady

What would be good to cover? I think it may be time to consolidate.

10:00:53
@purplelady:matrix.orgPurpleLadyThere are various electronics rooms and several are just the admin and maybe just me.16:52:03
11 Nov 2023
@protocall7:matrix.orgprotocall7I've noticed the same, ##analog is also dead. I don't think you did anything to run anyone off btw. TRNG idea sounds cool, but it's a bit over my head so I don't have any feedback haha. Consolidation might not be a horrible idea. I certainly miss the amount of people and interaction in #sparkfun and ##electronics on freenode IRC years ago 17:45:29
@purplelady:matrix.orgPurpleLadyAnd this room has no mods/admins.19:11:25
14 Nov 2023
@KhazAkar:matrix.orgKhazAkar joined the room.06:05:42
@vancha112:matrix.orgvancha112 changed their profile picture.21:00:19
17 Nov 2023
@ilya-epifanov:matrix.org@ilya-epifanov:matrix.org left the room.23:12:36
20 Nov 2023
@chargeitall:matrix.orgchargeitall joined the room.17:01:53
@chargeitall:matrix.orgchargeitallCan semiconductors from household appliances such as breast pumps, fridges, and washing machines be used for military purposes? Is this claim far-fetched?17:14:29
@purplelady:matrix.orgPurpleLadyI don't think most breast pumps would have semiconductors. I don't know too many refrigerators that would need semiconductors either. As for washing machines, maybe.17:22:30
@protocall7:matrix.orgprotocall7Guess it would depend on the semiconductor and the military purpose. Something generic like a logic gate could show up in just about anything. A microcontroller could be programmed to do anything as well. As far as whether or not consumer appliances would use "military spec" parts as far as temperature range, shock and vibration, etc... not sure, maybe?17:46:12
@chargeitall:matrix.orgchargeitallI was referring to removing chips from household devices, reprogramming them with new software, and using them for military purposes such as avionics, GPS, etc.20:12:53
21 Nov 2023
@purplelady:matrix.orgPurpleLadyUnless the items have like FPGAs in them, the "reprogramming" part doesn't sound likely.00:12:21
26 Nov 2023
@berlinuxer:kde.orgberlinuxer military specs expexts more robustness, of course. e.g. the temperature-range is wider than for industrial- or consumer-usage. i really doubt, that you will find a IC with mil-spec in household-devices 13:51:00
1 Dec 2023
@waitforthe:matrix.orgwaitforthe joined the room.18:36:39
@waitforthe:matrix.orgwaitforthecircuitmotor.jpg
Download circuitmotor.jpg
20:44:39
@waitforthe:matrix.orgwaitforthehi i got a question. here is a picture of my circuit, why is the motor still spining despite not triggered by the pir sensor output (3.3v). transistor is 2n2222. 3v motor 1.5A max draw. 12v power supply. 20:44:42
@waitforthe:matrix.orgwaitforthethe pir sensor actually ampliflies the rpms of the motor but the motor still contains a baseline rpm. i thought it should be zero power unless triggered by the transistor20:47:01
@waitforthe:matrix.orgwaitfortheif i remove the motor, it works fine with the led albeit larger resistor20:47:42
3 Dec 2023
@beect:matrix.orgbeect joined the room.03:35:26
6 Dec 2023
@psydroid:matrix.orgpsydroid changed their display name from psydroid to Tyrannosaurus Rex.17:21:47
@psydroid:matrix.orgpsydroid changed their display name from Tyrannosaurus Rex to psydroid.17:42:38
8 Dec 2023
@archer72:matrix.orgarcher72 (KD9VMW) joined the room.16:09:51
12 Dec 2023
@m:matrix.mahfoudh.orgDr. Dude joined the room.10:46:57
27 Dec 2023
@mriconoclast:matrix.org@mriconoclast:matrix.org changed their profile picture.11:09:53
@purplelady:matrix.orgPurpleLady changed their display name from purplelady to PurpleLady (cisgender, she/her).17:30:53
29 Dec 2023
@mriconoclast:matrix.org@mriconoclast:matrix.org
In reply to @waitforthe:matrix.org
sent an image.
no one will answer
16:13:23
@mriconoclast:matrix.org@mriconoclast:matrix.orgyou are losing time here 16:13:28
@purplelady:matrix.orgPurpleLadyWe are still here. But yeah, there are not mods/admins.16:51:23

Show newer messages


Back to Room ListRoom Version: