13 Jan 2024 |
TheRogueZeta#0120 | No, send new colors to it. | 05:13:58 |
TheRogueZeta#0120 | It may not like the 60FPS. | 05:14:14 |
DrNo | You can just turn down the framerate | 05:21:25 |
TheRogueZeta#0120 | You don't need to ping each time. | 05:21:36 |
DrNo | If you're updating 60 times per second then probably | 05:21:53 |
TheRogueZeta#0120 | Refresh rate is not the same as effect speed. | 05:22:04 |
DrNo | Adjust the FPS slider to the left until the problem disappears. | 05:23:29 |
DrNo | FPS otherwise known as frames per second | 05:23:48 |
DrNo | Yes, amazingly software effects require the software to be running | 05:34:55 |
森口友治 | https://openrgb.org/#pl | 09:03:12 |
森口友治 | so? | 09:07:12 |
森口友治 | appearantly | 09:09:18 |
森口友治 | for short, pipeline = experimental | 09:16:11 |
森口友治 | keyboard use USB | 09:35:28 |
森口友治 | Download image.png | 09:40:51 |
森口友治 | try change to SNLED27351 | 09:40:51 |
森口友治 | you better bin this keyboard | 09:42:21 |
森口友治 | reusing device id is bad | 09:45:13 |
森口友治 | one full size keyboard, one TKL how can it be same? | 09:48:25 |
DrNo | Given the hardware controller chip and the vendor the possibility that it's the same protocol ranges from slim chance to potential bricking situation. | 09:49:30 |
森口友治 | then you can try create a new device issue | 09:49:34 |
森口友治 | see 📌 | 09:52:14 |
森口友治 | command out
if (!rgb_matrix_indicators_advanced_user(led_min, led_max)) {
return;
} | 10:03:12 |
森口友治 | * command out in your v3.c
if (!rgb_matrix_indicators_advanced_user(led_min, led_max)) {
return;
} | 10:03:52 |
森口友治 | Download image.png | 10:05:26 |
森口友治 | https://discord.com/channels/699861463375937578/722900386028978186/1195663743233835040 | 10:07:01 |
森口友治 | nope | 10:07:19 |
森口友治 | Download image.png | 10:08:59 |
森口友治 | Download image.png | 10:09:00 |
森口友治 | go get some sleep, try not to brick your keyboard | 10:10:14 |