14 Jan 2024 |
TheArduinoGuy | Mini Rambo board on my printer | 14:11:01 |
TheArduinoGuy | yours is more recent version | 14:11:08 |
TheArduinoGuy | Have been considering updating to a 32 bit board | 17:59:40 |
TheArduinoGuy | bit then i may just get myself a Bambu A1 | 17:59:54 |
Onno | I'm not going to use Bambu Lab producs as long as they're using proprietary hardware | 18:30:29 |
Onno | I'm working on a new printer design. Not sure if it will be a CoreXY or an H-Bot, but something along those lines. | 18:31:44 |
Onno | I prefer the ability to mod the printer as I see fit. The Prusa is the printer that is the backup and is not going to be modded. (The Prusa Link is a supported feature, so not really a mod) | 18:33:02 |
darkmavrik | Make it a idex I just spent $20k on several machines switching over to thay | 18:51:27 |
darkmavrik | I think the bamboo labs is just a shit waste of money like your 80% to a solid platform that could do anything but purge towers are stupid I like different nozzles and filament at one time | 18:52:40 |
TheArduinoGuy | Someone just made an open source firmware for the A1 | 19:05:57 |
Onno | Going for a tool changer | 20:27:11 |
Onno | Starting with 2 tools, but the Duet tool board has room for 4 | 20:27:31 |
Onno | Also have an ERCF kit on the way | 20:27:50 |
18 Jan 2024 |
TheArduinoGuy | Onno: The ECRF looks interesting. I would like to hear how you get on with it. | 11:02:50 |
TheArduinoGuy | Anyone in this channel located in Kent, UK and has a resin printer? | 14:58:13 |
Onno | In reply to @TheArduinoGuy:matrix.org Onno: The ECRF looks interesting. I would like to hear how you get on with it. Once it gets here. Grigory, the guy behind Lecktor is taking his sweet time to send it. | 20:59:53 |
Onno | In reply to @TheArduinoGuy:matrix.org Onno: The ECRF looks interesting. I would like to hear how you get on with it. * Once it gets here. Grigory, the guy running Lecktor from his attic is taking his sweet time to send it. | 21:00:08 |
Onno | * Once it gets here. Grigory, the guy running Lecktor from his attic, is taking his sweet time to send it. | 21:30:17 |
29 Jan 2024 |
| Vulpo changed their display name from Savraska to Vulpo. | 12:27:17 |
| Vulpo changed their profile picture. | 12:27:39 |
| Vulpo changed their profile picture. | 12:27:50 |
3 Feb 2024 |
| DRE LOVES GUNS set a profile picture. | 02:20:59 |
4 Feb 2024 |
| Moritz Poldrack changed their profile picture. | 17:27:37 |
7 Feb 2024 |
Onno | Anyone got any tips for a MK3S with Revo6 clogging every ~100hrs or so when printing ABS? | 21:19:46 |
Onno | * Anyone got any tips for a MK3S with Revo6/0.4mm clogging every ~100hrs or so when printing ABS? | 21:19:59 |
Onno | Redacted or Malformed Event | 21:20:16 |
8 Feb 2024 |
TheArduinoGuy | Check extruder motor and/or gears, check you've not got 'heat creep' and ensure you are using a high enough temperature. | 09:33:28 |
TheArduinoGuy | You may also have a small piece of another filament trapped inside teh extruder. High temperature and force some filament through (by hand) will dislodge it. | 09:33:55 |
TheArduinoGuy | Come join us on our Discord folks.... https://discord.gg/ZgTYBEC2 | 09:34:45 |
Onno | TheArduinoGuy: Thanks for the advice! 👍️ | 18:08:50 |