!NEiAkyDpDrVpYTUHNE:matrix.org

3D Printing

13 Members
www.medwaymakers.com - 3D Printing discussions1 Servers

Load older messages


Timestamp Message
17 Aug 2019
21:44:58@TheArduinoGuy:matrix.orgTheArduinoGuySorry, testing the PrusaBot
21:46:02@pangalactic:matrix.orgPanGalacticI was getting concerned that your printer had gained sentience and was displaying emotions.
22:00:23@TheArduinoGuy:matrix.orgTheArduinoGuylol
22:43:31@prusabot:matrix.orgprusabot

Heartbeat - Printer status: Offline

Printer: Offline, RasPi: 49.4°C

23:43:31@prusabot:matrix.orgprusabot

Heartbeat - Printer status: Offline

Printer: Offline, RasPi: 49.4°C

18 Aug 2019
08:32:29@prusabot:matrix.orgprusabot

Successfully connected to printer

Printer: Operational, RasPi: 49.4°C

08:57:23@prusabot:matrix.orgprusabot

A new print has started : NeopixelGridV5.gcode

File NeopixelGridV5.gcode (1.5MB via OctoPrint)
Estimated print time 3 hours 13 minutes
ETA 01:10 PM today
Printer: Starting, Bed: 70.0°C/70.0°C, Nozzle0: 219.9°C/220.0°C, RasPi: 51.5°C


09:56:20@prusabot:matrix.orgprusabot

Print progress 25%

File NeopixelGridV5.gcode (1.5MB via OctoPrint)
Elapsed 58 minutes
Remaining 2 hours 35 minutes
ETA 01:32 PM today
Printer: Printing, Bed: 70.0°C/70.0°C, Nozzle0: 220.1°C/220.0°C, Nozzle Height: 5.60mm, RasPi: 52.6°C


10:41:43@prusabot:matrix.orgprusabot

Print progress 50%

File NeopixelGridV5.gcode (1.5MB via OctoPrint)
Elapsed 1 hour 44 minutes
Remaining 1 hour 44 minutes
ETA 01:26 PM today
Printer: Printing, Bed: 69.9°C/70.0°C, Nozzle0: 220.1°C/220.0°C, Nozzle Height: 11.20mm, RasPi: 51.5°C


11:27:03@prusabot:matrix.orgprusabot

Print progress 75%

File NeopixelGridV5.gcode (1.5MB via OctoPrint)
Elapsed 2 hours 29 minutes
Remaining 49 minutes
ETA 01:16 PM today
Printer: Printing, Bed: 69.9°C/70.0°C, Nozzle0: 220.0°C/220.0°C, Nozzle Height: 16.80mm, RasPi: 52.6°C


11:54:12@prusabot:matrix.orgprusabot

Print finished successfully : 2 hours 56 minutes

File NeopixelGridV5.gcode (1.5MB via OctoPrint)
Estimated print time 3 hours 13 minutes
Final print time 2 hours 56 minutes
Printer: Finishing, Bed: 70.1°C/0.0°C, Nozzle0: 219.2°C/0.0°C, Nozzle Height: 20.00mm, RasPi: 52.6°C


12:12:34@prusabot:matrix.orgprusabot

A new print has started : dupont-organizer.gcode

File dupont-organizer.gcode (3.2MB via OctoPrint)
Estimated print time 2 hours 40 minutes
ETA 03:52 PM today
Printer: Printing, Bed: 70.1°C/70.0°C, Nozzle0: 220.0°C/220.0°C, RasPi: 53.2°C

13:04:27@prusabot:matrix.orgprusabot

Print progress 25%

File dupont-organizer.gcode (3.2MB via OctoPrint)
Elapsed 51 minutes
Remaining 2 hours 12 minutes
ETA 04:16 PM today
Printer: Printing, Bed: 70.1°C/70.0°C, Nozzle0: 219.9°C/220.0°C, Nozzle Height: 1.00mm, RasPi: 52.6°C


13:36:40@prusabot:matrix.orgprusabot

Print progress 50%

File dupont-organizer.gcode (3.2MB via OctoPrint)
Elapsed 1 hour 24 minutes
Remaining 1 hour 25 minutes
ETA 04:01 PM today
Printer: Printing, Bed: 69.9°C/70.0°C, Nozzle0: 219.2°C/220.0°C, Nozzle Height: 2.00mm, RasPi: 53.7°C


14:08:50@prusabot:matrix.orgprusabot

Print progress 75%

File dupont-organizer.gcode (3.2MB via OctoPrint)
Elapsed 1 hour 56 minutes
Remaining 38 minutes
ETA 03:47 PM today
Printer: Printing, Bed: 70.0°C/70.0°C, Nozzle0: 220.0°C/220.0°C, Nozzle Height: 3.20mm, RasPi: 55.8°C


14:46:34@prusabot:matrix.orgprusabot

Print finished successfully : 2 hours 33 minutes

File dupont-organizer.gcode (3.2MB via OctoPrint)
Estimated print time 2 hours 40 minutes
Final print time 2 hours 33 minutes
Printer: Finishing, Bed: 70.0°C/0.0°C, Nozzle0: 219.4°C/0.0°C, Nozzle Height: 4.00mm, RasPi: 55.8°C


15:20:43@prusabot:matrix.orgprusabot

A new print has started : EiffelTower_fixed.gcode

File EiffelTower_fixed.gcode (2.7MB via OctoPrint)
Estimated print time 2 hours 3 minutes
ETA 06:24 PM today
Printer: Starting, Bed: 66.6°C/70.0°C, Nozzle0: 220.0°C/220.0°C, RasPi: 53.7°C

15:51:33@prusabot:matrix.orgprusabot

Print progress 25%

File EiffelTower_fixed.gcode (2.7MB via OctoPrint)
Elapsed 30 minutes
Remaining 1 hour 32 minutes
ETA 06:24 PM today
Printer: Printing, Bed: 69.7°C/70.0°C, Nozzle0: 220.0°C/220.0°C, Nozzle Height: 15.10mm, RasPi: 56.4°C


16:21:11@prusabot:matrix.orgprusabot

Print progress 50%

File EiffelTower_fixed.gcode (2.7MB via OctoPrint)
Elapsed 1 hour 0 minutes
Remaining 59 minutes
ETA 06:20 PM today
Printer: Printing, Bed: 69.9°C/70.0°C, Nozzle0: 219.9°C/220.0°C, Nozzle Height: 29.00mm, RasPi: 57.5°C


16:53:18@prusabot:matrix.orgprusabot

Print progress 75%

File EiffelTower_fixed.gcode (2.7MB via OctoPrint)
Elapsed 1 hour 32 minutes
Remaining 30 minutes
ETA 06:23 PM today
Printer: Printing, Bed: 69.9°C/70.0°C, Nozzle0: 220.0°C/220.0°C, Nozzle Height: 49.20mm, RasPi: 56.4°C


17:44:07@prusabot:matrix.orgprusabot

Print cancelled

File EiffelTower_fixed.gcode (2.7MB via OctoPrint)
Printer: Cancelling, Bed: 69.9°C/70.0°C, Nozzle0: 220.1°C/220.0°C, RasPi: 53.7°C


17:45:14@prusabot:matrix.orgprusabot

Printer disconnected

Printer: Offline, RasPi: 60.1°C

17:45:43@prusabot:matrix.orgprusabot

Successfully connected to printer

Printer: Operational, RasPi: 55.8°C

18:40:22@prusabot:matrix.orgprusabot

Printer disconnected

Printer: Offline, RasPi: 54.2°C

18:40:25@prusabot:matrix.orgprusabot

Printer disconnected

Printer: Offline, RasPi: 53.7°C

25 Aug 2019
10:27:24@inbonove3:matrix.org@inbonove3:matrix.org joined the room.
10:27:32@inbonove3:matrix.org@inbonove3:matrix.org left the room.
28 Aug 2019
16:48:16@sones:matrix.orgTom Sparrow set their display name to Tom Sparrow.
10 Sep 2019
06:39:29@lsolrac:matrix.orglsolrac joined the room.
12 Sep 2019
17:30:45@TheArduinoGuy:matrix.orgTheArduinoGuyhttps://blog.hackster.io/electronic-filament-embeds-semiconductors-directly-into-3d-prints-76a162741e3b

There are no newer messages yet.


Back to Room List