!NEiAkyDpDrVpYTUHNE:matrix.org

3D Printing

72 Members
www.medwaymakers.com - 3D Printing discussions - Livestream: https://youtu.be/GKp0x7-M_aQ6 Servers

Load older messages


SenderMessageTime
23 Apr 2021
@TheArduinoGuy:matrix.orgTheArduinoGuyThe electronics are pretty simple, it's just a piezo disc with a foam cone on top and the tip of the cone touches the mesh head of the snare 13:51:11
@TheArduinoGuy:matrix.orgTheArduinoGuyIt's about £200+ for a 12" snare pad so I can make one for a fraction of that cost13:51:35
@bestonerazy:matrix.orgbestonecrazy joined the room.23:09:25
30 Apr 2021
@amgv:matrix.org@amgv:matrix.org joined the room.01:27:13
1 May 2021
@prusabot:matrix.orgprusabot

A new print has started : bottom1_12inch.gcode

File bottom1_12inch.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time N/A
ETA N/A
Printer: Starting, Bed: 55.0°C/55.0°C, Nozzle: 215.0°C/215.0°C, RasPi: 65.0°C

09:06:28
@TheArduinoGuy:matrix.orgTheArduinoGuysnare.PNG
Download snare.PNG
10:08:55
@TheArduinoGuy:matrix.orgTheArduinoGuysnare closed.PNG
Download snare closed.PNG
10:09:06
@prusabot:matrix.orgprusabot

Print finished successfully : 2 hours 6 minutes

File bottom1_12inch.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time N/A
Final print time 2 hours 6 minutes
Printer: Finishing, Bed: 45.1°C/0.0°C, Nozzle: 205.0°C/0.0°C, Nozzle Height: 60.40mm, RasPi: 53.7°C

11:12:36
@prusabot:matrix.orgprusabot

A new print has started : bottom1_12inch.gcode_without_skirt.gcode

File bottom1_12inch.gcode_without_skirt.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time 1 hour 48 minutes
ETA 02:03 PM today
Printer: Starting, Bed: 45.2°C/45.0°C, Nozzle: 206.5°C/205.0°C, RasPi: 58.0°C

11:14:20
@TheArduinoGuy:matrix.orgTheArduinoGuyIMG_20210501_122327.jpg
Download IMG_20210501_122327.jpg
11:25:54
@prusabot:matrix.orgprusabot

Print finished successfully : 2 hours 5 minutes

File bottom1_12inch.gcode_without_skirt.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time 1 hour 48 minutes
Final print time 2 hours 5 minutes
Printer: Finishing, Bed: 45.0°C/0.0°C, Nozzle: 205.0°C/0.0°C, Nozzle Height: 60.40mm, RasPi: 54.2°C

13:19:54
@prusabot:matrix.orgprusabot

A new print has started : bottom1_12inch.gcode_B.gcode

File bottom1_12inch.gcode_B.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time 1 hour 59 minutes
ETA 04:44 PM today
Printer: Printing, Bed: 44.6°C/45.0°C, Nozzle: 205.8°C/205.0°C, RasPi: 52.1°C

13:45:05
@prusabot:matrix.orgprusabot

Print finished successfully : 2 hours 14 minutes

File bottom1_12inch.gcode_B.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time 1 hour 59 minutes
Final print time 2 hours 14 minutes
Printer: Finishing, Bed: 45.3°C/0.0°C, Nozzle: 205.1°C/0.0°C, Nozzle Height: 60.40mm, RasPi: 55.3°C

15:59:06
@prusabot:matrix.orgprusabot

A new print has started : bottom1_12inch.gcode_B.gcode

File bottom1_12inch.gcode_B.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time 2 hours 14 minutes
ETA 07:17 PM today
Printer: Starting, Bed: 44.9°C/45.0°C, Nozzle: 205.0°C/205.0°C, RasPi: 58.0°C

16:03:00
@TheArduinoGuy:matrix.orgTheArduinoGuyIMG_20210501_173612.jpg
Download IMG_20210501_173612.jpg
16:37:26
@prusabot:matrix.orgprusabot

Print finished successfully : 2 hours 14 minutes

File bottom1_12inch.gcode_B.gcode (3.0MB via OctoPrint)
User Mike
Estimated print time 2 hours 14 minutes
Final print time 2 hours 14 minutes
Printer: Finishing, Bed: 45.1°C/0.0°C, Nozzle: 205.0°C/0.0°C, Nozzle Height: 60.40mm, RasPi: 54.8°C

18:17:06
@prusabot:matrix.orgprusabot

A new print has started : bottom1_hole_12inch.gcode

File bottom1_hole_12inch.gcode (3.7MB via OctoPrint)
User Mike
Estimated print time N/A
ETA N/A
Printer: Printing, Bed: 45.2°C/45.0°C, Nozzle: 205.3°C/205.0°C, RasPi: 61.8°C

18:32:10
@prusabot:matrix.orgprusabot

Print finished successfully : 2 hours 18 minutes

File bottom1_hole_12inch.gcode (3.7MB via OctoPrint)
User Mike
Estimated print time N/A
Final print time 2 hours 18 minutes
Printer: Finishing, Bed: 44.9°C/0.0°C, Nozzle: 205.0°C/0.0°C, Nozzle Height: 0.50mm, RasPi: 58.0°C

20:51:00
2 May 2021
@jordan31:matrix.orgjordan31What is all that 02:06:40
@jordan31:matrix.orgjordan31And I'm curious how many printers do you run with the RasPi?02:08:00
@TheArduinoGuy:matrix.orgTheArduinoGuy It is a snare drum pad for my e-drum kit jordan31 07:54:20
@TheArduinoGuy:matrix.orgTheArduinoGuy * It is a snare drum pad for my e-drum kit jordan31 07:54:44
@prusabot:matrix.orgprusabot

A new print has started : bottom2_12inch_x_5.gcode

File bottom2_12inch_x_5.gcode (12.9MB via OctoPrint)
User Mike
Estimated print time 6 hours 23 minutes
ETA 03:18 PM today
Printer: Starting, Bed: 42.2°C/45.0°C, Nozzle: 206.4°C/205.0°C, RasPi: 55.8°C

07:54:52
@TheArduinoGuy:matrix.orgTheArduinoGuy I have just the one printer jordan31 and it is controlled by a Raspberry Pi running Octoprint 07:55:20
@TheArduinoGuy:matrix.orgTheArduinoGuyAbout to do a multi part print07:55:28
@TheArduinoGuy:matrix.orgTheArduinoGuymultiprint.PNG
Download multiprint.PNG
07:55:39
@TheArduinoGuy:matrix.orgTheArduinoGuyIMG_20210502_110221.jpg
Download IMG_20210502_110221.jpg
10:06:38
@TheArduinoGuy:matrix.orgTheArduinoGuyIMG_20210502_111412.jpg
Download IMG_20210502_111412.jpg
10:15:02
@prusabot:matrix.orgprusabot

Print finished successfully : 7 hours 36 minutes

File bottom2_12inch_x_5.gcode (12.9MB via OctoPrint)
User Mike
Estimated print time 6 hours 23 minutes
Final print time 7 hours 36 minutes
Printer: Finishing, Bed: 45.1°C/0.0°C, Nozzle: 205.0°C/0.0°C, Nozzle Height: 60.40mm, RasPi: 55.8°C

15:31:17
@prusabot:matrix.orgprusabot

A new print has started : bottom3_12inch.gcode

File bottom3_12inch.gcode (2.2MB via OctoPrint)
User Mike
Estimated print time 2 hours 7 minutes
ETA 07:20 PM today
Printer: Starting, Bed: 44.5°C/45.0°C, Nozzle: 205.7°C/205.0°C, RasPi: 53.2°C

16:12:04

Show newer messages


Back to Room List