| 23 Mar 2023 |
 Github [@rbckman:matrix.tarina.org] (deprecated) | [rbckman/tarina] rbckman pushed to master: viewfinder for hyperpixel screen - https://github.com/rbckman/tarina/commit/5d2a3e32e18d80e4b887c668a838140ba6a97a2c | 17:42:47 |
 anetbot | Print progress 25%File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Elapsed 12 minutes
Remaining 39 minutes
ETA 06:29 PM today
Printer: Printing, Bed: 54.96°C/55.0°C, Nozzle: 215.31°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 58.0°C
| 17:49:56 |
| anetbot | Print progress 50%File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Elapsed 15 minutes
Remaining 17 minutes
ETA 06:10 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 215.05°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 59.6°C
| 17:53:10 |
| anetbot | Print progress 75%File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Elapsed 19 minutes
Remaining 7 minutes 39 seconds
ETA 06:04 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 214.95°C/215.0°C, Nozzle Height: 1.70mm, RasPi: 59.1°C
| 17:56:35 |
| anetbot | Print finished successfully!File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Estimated print time 25 minutes
Final print time 30 minutes
Printer: Operational, Bed: 54.99°C/0.0°C, Nozzle: 214.38°C/0.0°C, Nozzle Height: 2.54mm, RasPi: 58.5°C
| 18:07:51 |
| anetbot | A new print has started!File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Estimated print time 25 minutes
ETA 07:32 PM today
Printer: Printing, Bed: 70.0°C/60.0°C, Nozzle: 99.88°C/230.0°C, RasPi: 59.1°C
| 19:07:06 |
| anetbot | Print progress 25%File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Elapsed 12 minutes
Remaining 38 minutes
ETA 07:57 PM today
Printer: Printing, Bed: 55.0°C/55.0°C, Nozzle: 215.52°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 58.5°C
| 19:19:38 |
| anetbot | Print progress 50%File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Elapsed 15 minutes
Remaining 16 minutes
ETA 07:39 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 215.1°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 59.1°C
| 19:22:47 |
| anetbot | Print progress 75%File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Elapsed 19 minutes
Remaining 7 minutes 25 seconds
ETA 07:33 PM today
Printer: Printing, Bed: 55.06°C/55.0°C, Nozzle: 215.21°C/215.0°C, Nozzle Height: 1.70mm, RasPi: 59.1°C
| 19:26:10 |
| anetbot | Print finished successfully!File tarina-screen-lid-hyperpixel.gcode (1.1MB via OctoPrint)
User rbckman
Estimated print time 25 minutes
Final print time 30 minutes
Printer: Operational, Bed: 54.94°C/0.0°C, Nozzle: 214.58°C/0.0°C, Nozzle Height: 2.54mm, RasPi: 58.5°C
| 19:37:24 |
| anetbot | A new print has started!File tarina-viewfinder-hyperpixel.gcode (23.5MB via OctoPrint)
User rbckman
Estimated print time 4 hours 27 minutes
ETA 12:09 AM tomorrow
Printer: Printing, Bed: 66.44°C/60.0°C, Nozzle: 100.26°C/230.0°C, RasPi: 61.8°C
| 19:42:26 |
| anetbot | :heavy_minus_sign: Print is being cancelled :no_good:File tarina-viewfinder-hyperpixel.gcode (23.5MB via OctoPrint)
User rbckman
Printer: Cancelling, Bed: 54.98°C/55.0°C, Nozzle: 215.63°C/215.0°C, RasPi: 59.1°C
| 20:53:16 |
| anetbot | :heavy_minus_sign: Print cancelled :no_good:File tarina-viewfinder-hyperpixel.gcode (23.5MB via OctoPrint)
User rbckman
Printer: Operational, Bed: 54.98°C/0.0°C, Nozzle: 215.63°C/0.0°C, RasPi: 60.1°C
| 20:53:16 |
| 26 Mar 2023 |
| anetbot | A new print has started!File tarina-screen-lid-hyperpixel.gcode (1.3MB via OctoPrint)
User rbckman
Estimated print time 28 minutes
ETA 08:39 PM today
Printer: Printing, Bed: 71.66°C/60.0°C, Nozzle: 119.86°C/230.0°C, RasPi: 45.1°C
| 19:11:09 |
| anetbot | Print progress 25%File tarina-screen-lid-hyperpixel.gcode (1.3MB via OctoPrint)
User rbckman
Elapsed 14 minutes
Remaining 43 minutes
ETA 09:09 PM today
Printer: Printing, Bed: 55.01°C/55.0°C, Nozzle: 215.36°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 48.3°C
| 19:25:25 |
| anetbot | Print progress 50%File tarina-screen-lid-hyperpixel.gcode (1.3MB via OctoPrint)
User rbckman
Elapsed 17 minutes
Remaining 18 minutes
ETA 08:47 PM today
Printer: Printing, Bed: 54.98°C/55.0°C, Nozzle: 215.83°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 48.3°C
| 19:29:01 |
| anetbot | Print progress 75%File tarina-screen-lid-hyperpixel.gcode (1.3MB via OctoPrint)
User rbckman
Elapsed 21 minutes
Remaining 8 minutes 4 seconds
ETA 08:40 PM today
Printer: Printing, Bed: 55.0°C/55.0°C, Nozzle: 215.16°C/215.0°C, Nozzle Height: 1.70mm, RasPi: 48.9°C
| 19:32:39 |
| anetbot | Print finished successfully!File tarina-screen-lid-hyperpixel.gcode (1.3MB via OctoPrint)
User rbckman
Estimated print time 28 minutes
Final print time 33 minutes
Printer: Operational, Bed: 55.06°C/0.0°C, Nozzle: 214.17°C/0.0°C, Nozzle Height: 2.54mm, RasPi: 47.8°C
| 19:44:24 |
| anetbot | A new print has started!File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Estimated print time N/A
ETA N/A
Printer: Printing, Bed: 80.0°C/60.0°C, Nozzle: 120.0°C/230.0°C, RasPi: 59.6°C
| 20:02:32 |
| anetbot | Print progress 25%File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Elapsed 1 hour 25 minutes
Remaining 4 hours 15 minutes
ETA 02:43 AM tomorrow
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 215.31°C/215.0°C, Nozzle Height: 10.94mm, RasPi: 49.4°C
| 21:28:30 |
| anetbot | Print progress 50%File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Elapsed 2 hours 41 minutes
Remaining 2 hours 40 minutes
ETA 02:24 AM tomorrow
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 215.26°C/215.0°C, Nozzle Height: 24.66mm, RasPi: 49.4°C
| 22:43:48 |
| 27 Mar 2023 |
| anetbot | Print progress 75%File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Elapsed 3 hours 58 minutes
Remaining 1 hour 19 minutes
ETA 02:19 AM today
Printer: Printing, Bed: 55.04°C/55.0°C, Nozzle: 214.95°C/215.0°C, Nozzle Height: 44.26mm, RasPi: 49.9°C
| 00:00:39 |
| anetbot | Print finished successfully!File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Estimated print time N/A
Final print time 5 hours 30 minutes
Printer: Operational, Bed: 55.01°C/0.0°C, Nozzle: 214.79°C/0.0°C, Nozzle Height: 78.14mm, RasPi: 49.9°C
| 01:32:53 |
| anetbot | A new print has started!File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Estimated print time 4 hours 27 minutes
ETA 02:48 PM today
Printer: Printing, Bed: 79.99°C/60.0°C, Nozzle: 120.01°C/230.0°C, RasPi: 49.4°C
| 09:20:52 |
| anetbot | Print progress 25%File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Elapsed 1 hour 25 minutes
Remaining 4 hours 18 minutes
ETA 04:04 PM today
Printer: Printing, Bed: 55.0°C/55.0°C, Nozzle: 215.36°C/215.0°C, Nozzle Height: 10.94mm, RasPi: 49.4°C
| 10:46:44 |
| anetbot | Print progress 50%File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Elapsed 2 hours 41 minutes
Remaining 2 hours 41 minutes
ETA 03:43 PM today
Printer: Printing, Bed: 55.05°C/55.0°C, Nozzle: 215.42°C/215.0°C, Nozzle Height: 24.66mm, RasPi: 49.9°C
| 12:02:02 |
| anetbot | Print progress 75%File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Elapsed 3 hours 58 minutes
Remaining 1 hour 19 minutes
ETA 03:38 PM today
Printer: Printing, Bed: 55.06°C/55.0°C, Nozzle: 215.1°C/215.0°C, Nozzle Height: 44.26mm, RasPi: 49.9°C
| 13:18:53 |
| anetbot | Print finished successfully!File tarina-viewfinder-hyperpixel.gcode (23.2MB via OctoPrint)
User rbckman
Estimated print time 4 hours 27 minutes
Final print time 5 hours 30 minutes
Printer: Operational, Bed: 55.04°C/0.0°C, Nozzle: 214.84°C/0.0°C, Nozzle Height: 78.14mm, RasPi: 49.4°C
| 14:51:04 |
| anetbot | A new print has started!File tarina-viewfinder-hyperpixel.gcode (23.5MB via OctoPrint)
User rbckman
Estimated print time 4 hours 27 minutes
ETA 11:31 PM today
Printer: Printing, Bed: 80.0°C/60.0°C, Nozzle: 120.02°C/230.0°C, RasPi: 50.5°C
| 18:03:56 |
| anetbot | Print progress 25%File tarina-viewfinder-hyperpixel.gcode (23.5MB via OctoPrint)
User rbckman
Elapsed 1 hour 23 minutes
Remaining 4 hours 10 minutes
ETA 12:37 AM tomorrow
Printer: Printing, Bed: 54.95°C/55.0°C, Nozzle: 213.91°C/215.0°C, Nozzle Height: 10.38mm, RasPi: 50.5°C
| 19:26:56 |
