!reZfkJrDzCJaMyFEHR:matrix.tarina.org

Tarina

8 Members
The filmmaking device | feel free to talk about features & please submit all the bugs here or on https://github.com/rbckman/tarina3 Servers

Load older messages


SenderMessageTime
16 Apr 2022
@anetbot:matrix.tarina.organetbot

Print finished successfully!

File tarina-body.gcode (18.0MB via OctoPrint)
User rbckman
Estimated print time 4 hours 29 minutes
Final print time 5 hours 54 minutes
Printer: Finishing, Bed: 55.0°C/0.0°C, Nozzle: 214.64°C/0.0°C, Nozzle Height: 47.90mm, RasPi: 48.9°C

16:04:37
18 Apr 2022
@anetbot:matrix.tarina.organetbot

A new print has started!

File cs-extension-tube.gcode (134.9KB via OctoPrint)
User rbckman
Estimated print time 2 minutes 28 seconds
ETA 04:25 PM today
Printer: Printing, Bed: 22.5°C/0.0°C, Nozzle: 21.28°C/0.0°C, RasPi: 46.2°C

13:23:19
@anetbot:matrix.tarina.organetbot

Print progress 25%

File cs-extension-tube.gcode (134.9KB via OctoPrint)
User rbckman
Elapsed 6 minutes 3 seconds
Remaining 1 minute 33 seconds
ETA 04:30 PM today
Printer: Printing, Bed: 60.04°C/60.0°C, Nozzle: 215.42°C/215.0°C, Nozzle Height: 0.30mm, RasPi: 47.2°C

13:29:22
@anetbot:matrix.tarina.organetbot

Print progress 50%

File cs-extension-tube.gcode (134.9KB via OctoPrint)
User rbckman
Elapsed 6 minutes 45 seconds
Remaining 11 minutes
ETA 04:41 PM today
Printer: Printing, Bed: 56.92°C/55.0°C, Nozzle: 214.69°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 47.8°C

13:30:04
@anetbot:matrix.tarina.organetbot

Print progress 75%

File cs-extension-tube.gcode (134.9KB via OctoPrint)
User rbckman
Elapsed 7 minutes 27 seconds
Remaining 7 minutes 36 seconds
ETA 04:38 PM today
Printer: Printing, Bed: 55.1°C/55.0°C, Nozzle: 215.26°C/215.0°C, Nozzle Height: 1.70mm, RasPi: 47.8°C

13:30:46
@anetbot:matrix.tarina.organetbot

Print finished successfully!

File cs-extension-tube.gcode (134.9KB via OctoPrint)
User rbckman
Estimated print time 2 minutes 28 seconds
Final print time 8 minutes 7 seconds
Printer: Operational, Bed: 54.93°C/0.0°C, Nozzle: 214.38°C/0.0°C, Nozzle Height: 2.26mm, RasPi: 47.2°C

13:31:26
@anetbot:matrix.tarina.organetbot

A new print has started!

File cs-extension-tube-07.gcode (107.8KB via OctoPrint)
User rbckman
Estimated print time 1 minute 56 seconds
ETA 04:38 PM today
Printer: Printing, Bed: 43.75°C/0.0°C, Nozzle: 86.54°C/0.0°C, RasPi: 48.3°C

13:36:06
@anetbot:matrix.tarina.organetbot

Print progress 25%

File cs-extension-tube-07.gcode (107.8KB via OctoPrint)
User rbckman
Elapsed 3 minutes 58 seconds
Remaining 1 minute 17 seconds
ETA 04:41 PM today
Printer: Printing, Bed: 60.02°C/60.0°C, Nozzle: 215.36°C/215.0°C, Nozzle Height: 0.30mm, RasPi: 47.2°C

13:40:04
@anetbot:matrix.tarina.organetbot

Print progress 50%

File cs-extension-tube-07.gcode (107.8KB via OctoPrint)
User rbckman
Elapsed 4 minutes 29 seconds
Remaining 45 seconds
ETA 04:41 PM today
Printer: Printing, Bed: 58.66°C/55.0°C, Nozzle: 211.88°C/215.0°C, Nozzle Height: 0.86mm, RasPi: 46.7°C

13:40:35
@anetbot:matrix.tarina.organetbot

Print progress 75%

File cs-extension-tube-07.gcode (107.8KB via OctoPrint)
User rbckman
Elapsed 5 minutes 3 seconds
Remaining 12 seconds
ETA 04:41 PM today
Printer: Printing, Bed: 54.87°C/55.0°C, Nozzle: 214.58°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 47.2°C

13:41:09
@anetbot:matrix.tarina.organetbot

Print finished successfully!

File cs-extension-tube-07.gcode (107.8KB via OctoPrint)
User rbckman
Estimated print time 1 minute 56 seconds
Final print time 5 minutes 35 seconds
Printer: Operational, Bed: 55.01°C/0.0°C, Nozzle: 214.58°C/0.0°C, Nozzle Height: 1.70mm, RasPi: 47.2°C

13:41:41
@anetbot:matrix.tarina.organetbot

A new print has started!

File tarina-body.gcode (18.0MB via OctoPrint)
User rbckman
Estimated print time 5 hours 54 minutes
ETA 12:45 AM tomorrow
Printer: Printing, Bed: 23.0°C/0.0°C, Nozzle: 21.5°C/0.0°C, RasPi: 46.2°C

15:51:07
@anetbot:matrix.tarina.organetbot

Print progress 25%

File tarina-body.gcode (18.0MB via OctoPrint)
User rbckman
Elapsed 1 hour 14 minutes
Remaining 3 hours 47 minutes
ETA 11:52 PM today
Printer: Printing, Bed: 55.01°C/55.0°C, Nozzle: 215.16°C/215.0°C, Nozzle Height: 2.26mm, RasPi: 47.2°C

17:05:08
@anetbot:matrix.tarina.organetbot

Print progress 50%

File tarina-body.gcode (18.0MB via OctoPrint)
User rbckman
Elapsed 2 hours 29 minutes
Remaining 2 hours 34 minutes
ETA 11:54 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 215.31°C/215.0°C, Nozzle Height: 6.74mm, RasPi: 47.2°C

18:20:08
@anetbot:matrix.tarina.organetbot

Print progress 75%

File tarina-body.gcode (18.0MB via OctoPrint)
User rbckman
Elapsed 4 hours 19 minutes
Remaining 1 hour 31 minutes
ETA 12:41 AM tomorrow
Printer: Printing, Bed: 55.01°C/55.0°C, Nozzle: 215.52°C/215.0°C, Nozzle Height: 28.02mm, RasPi: 47.2°C

20:10:12
@uniquefuckingusername:matrix.orgDOOMThis is cool! ⌛️ Should be done soon!21:25:27
@anetbot:matrix.tarina.organetbot

Print finished successfully!

File tarina-body.gcode (18.0MB via OctoPrint)
User rbckman
Estimated print time 5 hours 54 minutes
Final print time 5 hours 55 minutes
Printer: Operational, Bed: 54.99°C/0.0°C, Nozzle: 214.74°C/0.0°C, Nozzle Height: 47.90mm, RasPi: 47.2°C

21:46:37
19 Apr 2022
@anetbot:matrix.tarina.organetbot

A new print has started!

File tarina-picamera-hq-body.gcode (5.5MB via OctoPrint)
User rbckman
Estimated print time N/A
ETA N/A
Printer: Printing, Bed: 21.5°C/0.0°C, Nozzle: 20.0°C/0.0°C, RasPi: 52.1°C

07:25:52
@anetbot:matrix.tarina.organetbot

Print progress 25%

File tarina-picamera-hq-body.gcode (5.5MB via OctoPrint)
User rbckman
Elapsed 34 minutes
Remaining 1 hour 30 minutes
ETA 12:31 PM today
Printer: Printing, Bed: 55.01°C/55.0°C, Nozzle: 214.53°C/215.0°C, Nozzle Height: 3.10mm, RasPi: 45.1°C

08:00:20
@anetbot:matrix.tarina.organetbot

Print progress 50%

File tarina-picamera-hq-body.gcode (5.5MB via OctoPrint)
User rbckman
Elapsed 53 minutes
Remaining 48 minutes
ETA 12:07 PM today
Printer: Printing, Bed: 54.96°C/55.0°C, Nozzle: 215.52°C/215.0°C, Nozzle Height: 5.62mm, RasPi: 45.1°C

08:19:13
@anetbot:matrix.tarina.organetbot

Print progress 75%

File tarina-picamera-hq-body.gcode (5.5MB via OctoPrint)
User rbckman
Elapsed 1 hour 17 minutes
Remaining 23 minutes
ETA 12:06 PM today
Printer: Printing, Bed: 54.95°C/55.0°C, Nozzle: 214.48°C/215.0°C, Nozzle Height: 9.54mm, RasPi: 46.2°C

08:43:03
@anetbot:matrix.tarina.organetbot

Print finished successfully!

File tarina-picamera-hq-body.gcode (5.5MB via OctoPrint)
User rbckman
Estimated print time N/A
Final print time 1 hour 48 minutes
Printer: Finishing, Bed: 55.05°C/0.0°C, Nozzle: 213.7°C/0.0°C, Nozzle Height: 26.62mm, RasPi: 46.2°C

09:14:20
20 Apr 2022
@wybpip:matrix.org@wybpip:matrix.org joined the room.07:58:58
@wybpip:matrix.org@wybpip:matrix.org left the room.07:58:59
@anetbot:matrix.tarina.organetbot

A new print has started!

File tarina-screen-lid-hyperpixel.gcode (1.4MB via OctoPrint)
User rbckman
Estimated print time N/A
ETA N/A
Printer: Printing, Bed: 22.0°C/0.0°C, Nozzle: 20.69°C/0.0°C, RasPi: 52.1°C

08:40:03
@anetbot:matrix.tarina.organetbot

Print progress 25%

File tarina-screen-lid-hyperpixel.gcode (1.4MB via OctoPrint)
User rbckman
Elapsed 22 minutes
Remaining 53 minutes
ETA 12:56 PM today
Printer: Printing, Bed: 54.93°C/55.0°C, Nozzle: 210.16°C/215.0°C, Nozzle Height: 0.86mm, RasPi: 45.6°C

09:02:57
@anetbot:matrix.tarina.organetbot

Print progress 50%

File tarina-screen-lid-hyperpixel.gcode (1.4MB via OctoPrint)
User rbckman
Elapsed 32 minutes
Remaining 35 minutes
ETA 12:47 PM today
Printer: Printing, Bed: 55.11°C/55.0°C, Nozzle: 214.79°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 46.7°C

09:12:20
@anetbot:matrix.tarina.organetbot

Print progress 75%

File tarina-screen-lid-hyperpixel.gcode (1.4MB via OctoPrint)
User rbckman
Elapsed 42 minutes
Remaining 12 minutes
ETA 12:34 PM today
Printer: Printing, Bed: 54.98°C/55.0°C, Nozzle: 215.16°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 46.2°C

09:22:17
@anetbot:matrix.tarina.organetbot

Print finished successfully!

File tarina-screen-lid-hyperpixel.gcode (1.4MB via OctoPrint)
User rbckman
Estimated print time N/A
Final print time 56 minutes
Printer: Operational, Bed: 54.95°C/0.0°C, Nozzle: 214.17°C/0.0°C, Nozzle Height: 2.54mm, RasPi: 48.3°C

09:36:05
28 Apr 2022
@anetbot:matrix.tarina.organetbot

A new print has started!

File tarina-screen-lid-hyperpixel.gcode (687.6KB via OctoPrint)
User rbckman
Estimated print time 22 minutes
ETA 01:41 PM today
Printer: Starting, Bed: 28.5°C/60.0°C, Nozzle: 85.42°C/100.0°C, RasPi: 46.2°C

10:18:58

Show newer messages


Back to Room List