| 28 Apr 2022 |
 anetbot | Print progress 25%File tarina-screen-lid-hyperpixel.gcode (687.6KB via OctoPrint)
User rbckman
Elapsed 15 minutes
Remaining 52 minutes
ETA 02:26 PM today
Printer: Printing, Bed: 54.91°C/55.0°C, Nozzle: 215.16°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 45.1°C
| 10:34:46 |
| anetbot | Print progress 50%File tarina-screen-lid-hyperpixel.gcode (687.6KB via OctoPrint)
User rbckman
Elapsed 18 minutes
Remaining 22 minutes
ETA 02:00 PM today
Printer: Printing, Bed: 55.0°C/55.0°C, Nozzle: 214.84°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 45.1°C
| 10:37:16 |
| anetbot | Print progress 75%File tarina-screen-lid-hyperpixel.gcode (687.6KB via OctoPrint)
User rbckman
Elapsed 20 minutes
Remaining 11 minutes
ETA 01:50 PM today
Printer: Printing, Bed: 54.9°C/55.0°C, Nozzle: 215.0°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 45.6°C
| 10:38:57 |
| anetbot | Print finished successfully!File tarina-screen-lid-hyperpixel.gcode (687.6KB via OctoPrint)
User rbckman
Estimated print time 22 minutes
Final print time 30 minutes
Printer: Operational, Bed: 55.02°C/0.0°C, Nozzle: 213.49°C/0.0°C, Nozzle Height: 1.98mm, RasPi: 45.1°C
| 10:49:25 |
| 2 May 2022 |
| anetbot | A new print has started!File tarina-screen-lid-hyperpixel.gcode (688.3KB via OctoPrint)
User rbckman
Estimated print time 22 minutes
ETA 04:55 PM today
Printer: Printing, Bed: 27.0°C/60.0°C, Nozzle: 70.28°C/100.0°C, RasPi: 46.2°C
| 13:32:50 |
| anetbot | Print progress 25%File tarina-screen-lid-hyperpixel.gcode (688.3KB via OctoPrint)
User rbckman
Elapsed 15 minutes
Remaining 52 minutes
ETA 05:41 PM today
Printer: Printing, Bed: 55.07°C/55.0°C, Nozzle: 215.0°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 44.5°C
| 13:48:43 |
| anetbot | Print progress 50%File tarina-screen-lid-hyperpixel.gcode (688.3KB via OctoPrint)
User rbckman
Elapsed 18 minutes
Remaining 23 minutes
ETA 05:14 PM today
Printer: Printing, Bed: 55.04°C/55.0°C, Nozzle: 214.84°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 45.1°C
| 13:51:13 |
| anetbot | Print progress 75%File tarina-screen-lid-hyperpixel.gcode (688.3KB via OctoPrint)
User rbckman
Elapsed 20 minutes
Remaining 11 minutes
ETA 05:04 PM today
Printer: Printing, Bed: 54.88°C/55.0°C, Nozzle: 215.21°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 45.1°C
| 13:52:56 |
| anetbot | Print finished successfully!File tarina-screen-lid-hyperpixel.gcode (688.3KB via OctoPrint)
User rbckman
Estimated print time 22 minutes
Final print time 30 minutes
Printer: Operational, Bed: 54.98°C/0.0°C, Nozzle: 215.57°C/0.0°C, Nozzle Height: 1.98mm, RasPi: 45.1°C
| 14:03:18 |
| 3 May 2022 |
| anetbot | A new print has started!File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Estimated print time N/A
ETA N/A
Printer: Printing, Bed: 30.19°C/60.0°C, Nozzle: 45.16°C/100.0°C, RasPi: 53.7°C
| 15:55:47 |
| anetbot | Print progress 25%File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Elapsed 1 hour 12 minutes
Remaining 3 hours 28 minutes
ETA 11:37 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 214.9°C/215.0°C, Nozzle Height: 2.26mm, RasPi: 45.6°C
| 17:08:36 |
| anetbot | :heavy_minus_sign: Print is being cancelled :no_good:File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Elapsed 1 hour 46 minutes
Remaining 2 hours 9 minutes
ETA 10:51 PM today
Printer: Cancelling, Bed: 54.96°C/55.0°C, Nozzle: 215.26°C/215.0°C, Nozzle Height: 3.10mm, RasPi: 45.6°C
| 17:42:15 |
| anetbot | :heavy_minus_sign: Print cancelled :no_good:File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Printer: Operational, Bed: 54.96°C/0.0°C, Nozzle: 215.26°C/0.0°C, RasPi: 47.2°C
| 17:42:15 |
| 4 May 2022 |
|  @wybpip:matrix.org joined the room. | 09:49:47 |
| @wybpip:matrix.org left the room. | 09:49:48 |
| 6 May 2022 |
| anetbot | A new print has started!File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Estimated print time 4 hours 29 minutes
ETA 02:02 PM today
Printer: Printing, Bed: 42.78°C/60.0°C, Nozzle: 99.75°C/100.0°C, RasPi: 43.5°C
| 06:33:00 |
| anetbot | Print progress 25%File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Elapsed 1 hour 11 minutes
Remaining 3 hours 37 minutes
ETA 02:22 PM today
Printer: Printing, Bed: 55.11°C/55.0°C, Nozzle: 215.1°C/215.0°C, Nozzle Height: 2.26mm, RasPi: 45.1°C
| 07:44:40 |
| anetbot | Print progress 50%File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Elapsed 2 hours 26 minutes
Remaining 2 hours 29 minutes
ETA 02:29 PM today
Printer: Printing, Bed: 55.0°C/55.0°C, Nozzle: 215.1°C/215.0°C, Nozzle Height: 6.74mm, RasPi: 45.6°C
| 08:59:42 |
| anetbot | Print progress 75%File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Elapsed 4 hours 16 minutes
Remaining 1 hour 28 minutes
ETA 03:18 PM today
Printer: Printing, Bed: 54.94°C/55.0°C, Nozzle: 215.89°C/215.0°C, Nozzle Height: 28.02mm, RasPi: 47.2°C
| 10:49:53 |
| anetbot | Print finished successfully!File tarina-body.gcode (18.1MB via OctoPrint)
User rbckman
Estimated print time 4 hours 29 minutes
Final print time 5 hours 53 minutes
Printer: Finishing, Bed: 55.02°C/0.0°C, Nozzle: 214.64°C/0.0°C, Nozzle Height: 47.90mm, RasPi: 48.3°C
| 12:26:24 |
| 7 May 2022 |
| anetbot | A new print has started!File tarina-right-side.gcode (5.1MB via OctoPrint)
User rbckman
Estimated print time N/A
ETA N/A
Printer: Printing, Bed: 22.81°C/0.0°C, Nozzle: 21.09°C/0.0°C, RasPi: 55.8°C
| 06:28:33 |
| anetbot | Print progress 25%File tarina-right-side.gcode (5.1MB via OctoPrint)
User rbckman
Elapsed 37 minutes
Remaining 1 hour 45 minutes
ETA 11:51 AM today
Printer: Printing, Bed: 54.93°C/55.0°C, Nozzle: 215.1°C/215.0°C, Nozzle Height: 1.70mm, RasPi: 46.2°C
| 07:06:07 |
| anetbot | Print progress 50%File tarina-right-side.gcode (5.1MB via OctoPrint)
User rbckman
Elapsed 52 minutes
Remaining 48 minutes
ETA 11:09 AM today
Printer: Printing, Bed: 55.02°C/55.0°C, Nozzle: 215.1°C/215.0°C, Nozzle Height: 2.54mm, RasPi: 47.2°C
| 07:20:43 |
| anetbot | Print progress 75%File tarina-right-side.gcode (5.1MB via OctoPrint)
User rbckman
Elapsed 1 hour 7 minutes
Remaining 21 minutes
ETA 10:57 AM today
Printer: Printing, Bed: 54.94°C/55.0°C, Nozzle: 214.69°C/215.0°C, Nozzle Height: 3.38mm, RasPi: 46.2°C
| 07:35:57 |
| anetbot | Print finished successfully!File tarina-right-side.gcode (5.1MB via OctoPrint)
User rbckman
Estimated print time N/A
Final print time 1 hour 54 minutes
Printer: Operational, Bed: 55.01°C/0.0°C, Nozzle: 214.27°C/0.0°C, Nozzle Height: 13.46mm, RasPi: 46.2°C
| 08:22:55 |
| anetbot | A new print has started!File tarina-button-plate-bottom.gcode (6.1MB via OctoPrint)
User rbckman
Estimated print time N/A
ETA N/A
Printer: Starting, Bed: 24.0°C/0.0°C, Nozzle: 22.03°C/0.0°C, RasPi: 53.7°C
| 10:16:38 |
| anetbot | Print progress 25%File tarina-button-plate-bottom.gcode (6.1MB via OctoPrint)
User rbckman
Elapsed 51 minutes
Remaining 2 hours 18 minutes
ETA 04:26 PM today
Printer: Printing, Bed: 54.98°C/55.0°C, Nozzle: 215.31°C/215.0°C, Nozzle Height: 2.26mm, RasPi: 47.2°C
| 11:08:00 |
| anetbot | Print progress 50%File tarina-button-plate-bottom.gcode (6.1MB via OctoPrint)
User rbckman
Elapsed 1 hour 13 minutes
Remaining 1 hour 8 minutes
ETA 03:38 PM today
Printer: Printing, Bed: 54.91°C/55.0°C, Nozzle: 214.69°C/215.0°C, Nozzle Height: 5.06mm, RasPi: 47.2°C
| 11:29:45 |
| anetbot | Print progress 75%File tarina-button-plate-bottom.gcode (6.1MB via OctoPrint)
User rbckman
Elapsed 1 hour 38 minutes
Remaining 30 minutes
ETA 03:25 PM today
Printer: Printing, Bed: 55.02°C/55.0°C, Nozzle: 215.52°C/215.0°C, Nozzle Height: 8.70mm, RasPi: 47.2°C
| 11:54:41 |
| anetbot | Print finished successfully!File tarina-button-plate-bottom.gcode (6.1MB via OctoPrint)
User rbckman
Estimated print time N/A
Final print time 2 hours 13 minutes
Printer: Operational, Bed: 54.96°C/0.0°C, Nozzle: 212.81°C/0.0°C, Nozzle Height: 26.62mm, RasPi: 48.3°C
| 12:29:45 |
