| 4 May 2023 |
 anetbot | Print progress 25%File tarina-button-plate-upper.gcode (476.3KB via OctoPrint)
User rbckman
Elapsed 5 minutes 12 seconds
Remaining 17 minutes
ETA 02:54 PM today
Printer: Printing, Bed: 59.13°C/55.0°C, Nozzle: 224.81°C/215.0°C, Nozzle Height: 0.58mm, RasPi: 49.9°C
| 13:37:12 |
| anetbot | Print progress 50%File tarina-button-plate-upper.gcode (476.3KB via OctoPrint)
User rbckman
Elapsed 8 minutes 40 seconds
Remaining 10 minutes
ETA 02:50 PM today
Printer: Printing, Bed: 55.05°C/55.0°C, Nozzle: 215.52°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 48.9°C
| 13:40:55 |
| anetbot | Print progress 75%File tarina-button-plate-upper.gcode (476.3KB via OctoPrint)
User rbckman
Elapsed 11 minutes
Remaining 5 minutes 16 seconds
ETA 02:48 PM today
Printer: Printing, Bed: 55.0°C/55.0°C, Nozzle: 214.53°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 49.4°C
| 13:43:25 |
| anetbot | Print finished successfully!File tarina-button-plate-upper.gcode (476.3KB via OctoPrint)
User rbckman
Estimated print time 11 minutes
Final print time 15 minutes
Printer: Operational, Bed: 54.94°C/0.0°C, Nozzle: 213.8°C/0.0°C, Nozzle Height: 2.26mm, RasPi: 49.4°C
| 13:47:52 |
| anetbot | A new print has started!File tarina-picamera-screwhandle.gcode (1.2MB via OctoPrint)
User rbckman
Estimated print time 11 minutes
ETA 07:00 PM today
Printer: Printing, Bed: 60.0°C/60.0°C, Nozzle: 100.1°C/100.0°C, RasPi: 49.4°C
| 17:49:46 |
| anetbot | Print progress 25%File tarina-picamera-screwhandle.gcode (1.2MB via OctoPrint)
User rbckman
Elapsed 4 minutes 41 seconds
Remaining 7 minutes 44 seconds
ETA 07:02 PM today
Printer: Printing, Bed: 55.0°C/55.0°C, Nozzle: 215.0°C/215.0°C, Nozzle Height: 2.82mm, RasPi: 49.4°C
| 17:54:27 |
| anetbot | Print progress 50%File tarina-picamera-screwhandle.gcode (1.2MB via OctoPrint)
User rbckman
Elapsed 7 minutes 39 seconds
Remaining 8 minutes 51 seconds
ETA 07:06 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 215.31°C/215.0°C, Nozzle Height: 5.06mm, RasPi: 49.4°C
| 17:57:25 |
| anetbot | Print progress 75%File tarina-picamera-screwhandle.gcode (1.2MB via OctoPrint)
User rbckman
Elapsed 10 minutes
Remaining 4 minutes 47 seconds
ETA 07:05 PM today
Printer: Printing, Bed: 55.05°C/55.0°C, Nozzle: 215.52°C/215.0°C, Nozzle Height: 7.30mm, RasPi: 49.4°C
| 18:00:30 |
| anetbot | Print finished successfully!File tarina-picamera-screwhandle.gcode (1.2MB via OctoPrint)
User rbckman
Estimated print time 11 minutes
Final print time 15 minutes
Printer: Operational, Bed: 55.0°C/0.0°C, Nozzle: 214.84°C/0.0°C, Nozzle Height: 17.10mm, RasPi: 49.4°C
| 18:04:53 |
| anetbot | A new print has started!File tarina-screen-lid-hyperpixel.gcode (1.6MB via OctoPrint)
User rbckman
Estimated print time 33 minutes
ETA 08:56 PM today
Printer: Printing, Bed: 60.0°C/60.0°C, Nozzle: 99.84°C/100.0°C, RasPi: 49.4°C
| 19:23:10 |
| anetbot | Print progress 25%File tarina-screen-lid-hyperpixel.gcode (1.6MB via OctoPrint)
User rbckman
Elapsed 16 minutes
Remaining 51 minutes
ETA 09:31 PM today
Printer: Printing, Bed: 54.96°C/55.0°C, Nozzle: 215.05°C/215.0°C, Nozzle Height: 1.14mm, RasPi: 48.9°C
| 19:40:05 |
| anetbot | Print progress 50%File tarina-screen-lid-hyperpixel.gcode (1.6MB via OctoPrint)
User rbckman
Elapsed 20 minutes
Remaining 22 minutes
ETA 09:06 PM today
Printer: Printing, Bed: 55.01°C/55.0°C, Nozzle: 215.0°C/215.0°C, Nozzle Height: 1.42mm, RasPi: 49.4°C
| 19:44:07 |
| anetbot | Print progress 75%File tarina-screen-lid-hyperpixel.gcode (1.6MB via OctoPrint)
User rbckman
Elapsed 25 minutes
Remaining 9 minutes 34 seconds
ETA 08:57 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 214.79°C/215.0°C, Nozzle Height: 1.70mm, RasPi: 49.9°C
| 19:48:37 |
| anetbot | Print finished successfully!File tarina-screen-lid-hyperpixel.gcode (1.6MB via OctoPrint)
User rbckman
Estimated print time 33 minutes
Final print time 39 minutes
Printer: Operational, Bed: 55.04°C/0.0°C, Nozzle: 212.81°C/0.0°C, Nozzle Height: 3.38mm, RasPi: 48.3°C
| 20:02:26 |
| 15 May 2023 |
|  rbckmanchanged room power levels. | 11:41:31 |
| rbckman invited  GitHub. | 11:41:31 |
| GitHub joined the room. | 11:41:32 |
| 12 Jun 2023 |
| rbckman | blqa | 06:48:08 |
| 13 Jun 2023 |
 DOOM | BLQA+ | 01:39:59 |
| 23 Jun 2023 |
| anetbot | A new print has started!File gandalfpipe15cm-nyer.gcode (7.5MB via OctoPrint)
User rbckman
Estimated print time 1 hour 2 minutes
ETA 08:06 AM today
Printer: Printing, Bed: 60.0°C/60.0°C, Nozzle: 99.88°C/100.0°C, RasPi: 56.4°C
| 06:04:07 |
| anetbot | Print progress 25%File gandalfpipe15cm-nyer.gcode (7.5MB via OctoPrint)
User rbckman
Elapsed 23 minutes
Remaining 1 hour 11 minutes
ETA 08:38 AM today
Printer: Printing, Bed: 55.01°C/55.0°C, Nozzle: 214.84°C/215.0°C, Nozzle Height: 38.06mm, RasPi: 51.5°C
| 06:27:21 |
| anetbot | Print progress 50%File gandalfpipe15cm-nyer.gcode (7.5MB via OctoPrint)
User rbckman
Elapsed 42 minutes
Remaining 43 minutes
ETA 08:29 AM today
Printer: Printing, Bed: 54.95°C/55.0°C, Nozzle: 215.1°C/215.0°C, Nozzle Height: 76.70mm, RasPi: 52.1°C
| 06:46:07 |
| anetbot | Print progress 75%File gandalfpipe15cm-nyer.gcode (7.5MB via OctoPrint)
User rbckman
Elapsed 58 minutes
Remaining 20 minutes
ETA 08:23 AM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 214.84°C/215.0°C, Nozzle Height: 118.98mm, RasPi: 53.7°C
| 07:02:57 |
| anetbot | Print finished successfully!File gandalfpipe15cm-nyer.gcode (7.5MB via OctoPrint)
User rbckman
Estimated print time 1 hour 2 minutes
Final print time 1 hour 16 minutes
Printer: Operational, Bed: 55.02°C/0.0°C, Nozzle: 214.69°C/0.0°C, Nozzle Height: 168.26mm, RasPi: 52.6°C
| 07:20:57 |
| 6 Jul 2023 |
| anetbot | A new print has started!File tarina-viewfinder-hyperpixel.gcode (23.8MB via OctoPrint)
User rbckman
Estimated print time 4 hours 36 minutes
ETA 03:05 PM today
Printer: Printing, Bed: 69.99°C/60.0°C, Nozzle: 99.88°C/230.0°C, RasPi: 50.5°C
| 09:29:36 |
| anetbot | Print progress 25%File tarina-viewfinder-hyperpixel.gcode (23.8MB via OctoPrint)
User rbckman
Elapsed 1 hour 33 minutes
Remaining 4 hours 40 minutes
ETA 04:42 PM today
Printer: Printing, Bed: 55.02°C/55.0°C, Nozzle: 230.78°C/230.0°C, Nozzle Height: 10.10mm, RasPi: 49.9°C
| 11:02:39 |
| anetbot | :heavy_minus_sign: Print is being cancelled :no_good:File tarina-viewfinder-hyperpixel.gcode (23.8MB via OctoPrint)
User rbckman
Printer: Cancelling, Bed: 55.01°C/55.0°C, Nozzle: 230.08°C/230.0°C, RasPi: 49.9°C
| 11:06:28 |
| anetbot | :heavy_minus_sign: Print cancelled :no_good:File tarina-viewfinder-hyperpixel.gcode (23.8MB via OctoPrint)
User rbckman
Printer: Cancelling, Bed: 55.06°C/0.0°C, Nozzle: 229.69°C/0.0°C, RasPi: 51.0°C
| 11:06:29 |
| anetbot | A new print has started!File tarina-screen-lid-hyperpixel-bridges.gcode (3.1MB via OctoPrint)
User rbckman
Estimated print time 50 minutes
ETA 05:51 PM today
Printer: Printing, Bed: 60.0°C/60.0°C, Nozzle: 99.9°C/100.0°C, RasPi: 49.4°C
| 16:01:19 |
| anetbot | Print progress 25%File tarina-screen-lid-hyperpixel-bridges.gcode (3.1MB via OctoPrint)
User rbckman
Elapsed 21 minutes
Remaining 1 hour 5 minutes
ETA 06:27 PM today
Printer: Printing, Bed: 54.99°C/55.0°C, Nozzle: 230.0°C/230.0°C, Nozzle Height: 1.42mm, RasPi: 49.4°C
| 16:22:32 |
