1 Jan 2024 |
arkimedes2020 | I'm having some problems with the knob print file... It has a unit of measurement in feet and results in a giant object if scaled or very small if left at the original scale... | 21:52:12 |
positionhigh | i have seen this, maybe because it is so small. you have to scale it by 100, 1000, 10000 not sure what your slicer did, until you get it about 18mm height | 21:54:54 |
arkimedes2020 | 10000% | 22:09:04 |
2 Jan 2024 |
treen_. | hey arkimedes, if you're successful, would you be open to making a deal to print a case for me in the future? I haven't built a new MDT with the new specs yet but eventually I'll get around to it and I agree that the prices are a bit high to get one done by PCBWay. If I had a makerspace nearby I'd do it there | 02:09:17 |
treen_. | I will say the case I have from PCBWay is extremely good and the tolerances have been good enough that it doesn't need screws, so they do good work | 02:09:56 |
.ragrat | What country are you in? | 02:12:00 |
treen_. | US | 02:12:14 |
| mintemp joined the room. | 09:58:44 |
m.c.gentry_31770 | Download Screenshot_2024-01-02_at_3.02.43_PM.png | 20:08:30 |
m.c.gentry_31770 | Hey all, I see an 11 pin angled pin header on the capacitive diagram, but not in the BOM. Is that optional? | 20:08:30 |
arkimedes2020 | I'm very sorry bro, I'm in Italy, impractical... | 20:08:31 |
positionhigh | m.c.gentry_31770 that's optional for user expansions | 20:09:42 |
m.c.gentry_31770 | whew, thanks! | 20:09:55 |
m.c.gentry_31770 | I realized there are a bunch of pin items that are optional. I can't always tell which is which | 20:11:03 |
positionhigh | The left side to the mini plugs are all optional. If you use midi , you need the midi pins. | 20:12:26 |
m.c.gentry_31770 | ok, so I've got a couple more questions then... | 20:16:15 |
m.c.gentry_31770 | I will definitely be using MIDI, TRS and USB... | 20:16:28 |
m.c.gentry_31770 | Download Screenshot_2024-01-02_at_3.14.48_PM.png | 20:16:53 |
m.c.gentry_31770 | the pins circled in white, needed or not? | 20:16:53 |
m.c.gentry_31770 | I can see one says SPDIF, so, don't really need that. but then there's G1, G2, G3 | 20:18:15 |
m.c.gentry_31770 | Looking at the resistive board it seems none of those are required | 20:22:29 |
m.c.gentry_31770 | I also see further down in build instructions some pics showing completed boards, where I can see not all the 'hole's are filled in | 20:25:19 |
m.c.gentry_31770 | Download Screenshot_2024-01-02_at_3.26.48_PM.png | 20:27:11 |
m.c.gentry_31770 | does anyone have a pic of the capacitance board completed? Like this one but not resistive... | 20:27:11 |
m.c.gentry_31770 | that would be helpful | 20:27:27 |
m.c.gentry_31770 | lemmy check the 'show me' | 20:27:34 |
m.c.gentry_31770 | did not spy one | 20:29:33 |
positionhigh | You need to set only the midi pins to type a or type B and the amp to be present or skipped. Everything else is for very specific needs | 21:08:36 |
m.c.gentry_31770 | ok great, thanks | 21:10:12 |
m.c.gentry_31770 | what about Chase Bliss MIDI Z? JK, those guys are krazy and their MIDI is all to itself | 21:11:01 |