!kELWSZzxsedZcomSBQ:matrix.org

Solus Off-topic

306 Members
Community hangout | Solus 4.5 Resilience Released: https://getsol.us/2024/01/08/solus-4-5-released/ | Forums: https://discuss.getsol.us | Dev Tracker: https://dev.getsol.us | Help Center: https://help.getsol.us37 Servers

Load older messages


SenderMessageTime
16 Sep 2024
@moriel5:matrix.orgmoriel5
In reply to @staudey:matrix.org
Solus Firefox tends to rejigger the settings every once in a while for some reason. At least when it comes to languages.
For me, the languages were untouched.
18:07:19
@staudey:matrix.orgStaudeyThere is a fix in place for the language reset thing, but I've seen people complain about it again recently, so I thought it might be related18:07:53
@reillybrogan:matrix.orgReilly Brogan
In reply to @moriel5:matrix.org
Unfortunately, not with the I/O and featureset I need.
Even what I had listed is 2nd hand/refurbished at these prices.
That's fair. I have a lot of NVMe drives (I like to isolate I/O of various things for performance) and I struggle with the number of PCI-e lanes available on consumer CPUs
18:11:58
@reillybrogan:matrix.orgReilly BroganI think my next platform will have to be threadripper or low-end Epyc just to have enough18:12:17
@reillybrogan:matrix.orgReilly Brogan
In reply to @moriel5:matrix.org

When I have the budget (well, technically I have one, however it is waiting for the budget to build a ThinkPad L15 Gen1 AMD).

I'm not going to switch to a drive that will die on me within a few years.

The endurance of modern flash isn't really an issue any more in basically any usecase. Even low-end drives are rated for far more writes than any user is ever likely to use, even with swap
18:13:41
@reillybrogan:matrix.orgReilly BroganThe 500GB SK Hynix Gold P31 for example (an excellent drive that's fairly affordable) uses TLC NAND and is rated for 500TB of writes, which is writing the entire space of the drive 1000x times. Virtually noone out of datacenters using them as caching drives is ever going to come close to that18:16:11
@moriel5:matrix.orgmoriel5
In reply to @reillybrogan:matrix.org
That's fair. I have a lot of NVMe drives (I like to isolate I/O of various things for performance) and I struggle with the number of PCI-e lanes available on consumer CPUs
For me it's less about NVMe specifically (although those too), but PCIe in general, as I need as many slots as possible, both for my uses, and for testing (as part of troubleshooting), and some of those PCIe cards could be controllers for other protocols, such as Firewire or serial (if the on-board isn't working for me) or parallel (all which I am still relying upon PCI for).
18:27:31
@staudey:matrix.orgStaudey
In reply to @reillybrogan:matrix.org
The 500GB SK Hynix Gold P31 for example (an excellent drive that's fairly affordable) uses TLC NAND and is rated for 500TB of writes, which is writing the entire space of the drive 1000x times. Virtually noone out of datacenters using them as caching drives is ever going to come close to that
Yeah, my SSD has seen 72.58 TB written over 12870 hrs power-on time. Would still be quite a while to get to even half of 500 TB.
18:30:25
@moriel5:matrix.orgmoriel5
In reply to @reillybrogan:matrix.org
The endurance of modern flash isn't really an issue any more in basically any usecase. Even low-end drives are rated for far more writes than any user is ever likely to use, even with swap
I'm not a normal user.
I could easily be compiling something, and then using SDIO to prepare Windows drivers for someone's PC (and the download of the driver packs is via P2P), and I the future I may also so something actually heavy (and I am aiming for at least 10 years of endurance under semi-heavy load).
18:30:28
@moriel5:matrix.orgmoriel5
In reply to @reillybrogan:matrix.org
The 500GB SK Hynix Gold P31 for example (an excellent drive that's fairly affordable) uses TLC NAND and is rated for 500TB of writes, which is writing the entire space of the drive 1000x times. Virtually noone out of datacenters using them as caching drives is ever going to come close to that
That is certainly a good drive, and if it not for the Firecuda, I would have recommended it.
18:31:45
@moriel5:matrix.orgmoriel5Apparently I have permission to react to others' posts, however I do not have permission to remove my reaction?18:35:58
@moriel5:matrix.orgmoriel5* Apparently I have permission to react to others' posts here, however I do not have permission to remove my reaction?18:36:16
@helium1:matrix.orghelium1no you can't remove reactions in this room18:37:07
@helium1:matrix.orghelium1and delete your posts18:37:37
@helium1:matrix.orghelium1only edit18:37:53
@davidjharder:matrix.orgDavid HarderIn the past we've had members who would delete their posts sporadically. It was surprisingly disruptive, so it got nerfed18:40:17
@helium1:matrix.orghelium1Redacted or Malformed Event18:41:44
@joebonrichie:matrix.orgJoey Richespetition granted 📜 🤓18:54:27
@joebonrichie:matrix.orgJoey Riches(sry xD)18:54:33
@stigarn:matrix.orgstigarnCool that Github autmatically just adds link to cves19:31:34
@stigarn:matrix.orgstigarnjust added the cve number and then it linked to them19:31:54
@staudey:matrix.orgStaudeyThe Software Center does too but nobody appreciates it. Poor SC 😥19:34:02
@dimasic:matrix.orgdimasic joined the room.19:43:56
@dimasic:matrix.orgdimasicHi19:44:17
@helium1:matrix.orghelium1hello new Solus user!19:44:36
@dimasic:matrix.orgdimasic Can anyone explain to me what usr merge will be needed for? 19:45:43
@traceyc:matrix.orgTraceyC If you hadn't already read it, we have a blog post about it. 19:48:17
@helium1:matrix.orghelium1yup!19:48:42
@traceyc:matrix.orgTraceyCBeyond anything else, it's becoming an industry standard. It will also be needed to integrate Serpent tooling19:48:43
@staudey:matrix.orgStaudeyIt's also required for systemd 25519:50:18

There are no newer messages yet.


Back to Room ListRoom Version: 10